How to pair an OKIN / DewertOkin remote
Pick your handset or receiver. Every procedure comes from a DewertOkin document, and the key combination differs by system — the wrong one pairs the second channel instead.
Which remote do you have?
RF ECO 2.4 GHz handset (eco)
Small 6-key handset (back up/down, legs up/down, two “both” keys), 2 × AAA batteries, paired to an OKIMAT drive or an external RF eco receiver.
- Hold the handset less than 2 m from the receiver.
- Press the pairing button on the receiver (or on the OKIMAT drive) twice until its LED lights up. Pairing stays open for 10 seconds.
- Within those 10 seconds press keys 1 + 2 together until the receiver LED goes out — the remote is paired.
- Second bed or RF power outlet: repeat the sequence with keys 3 + 4.
- Keys 1 + 2 also switch the floor light; keys 3 + 4 also switch the RF power outlet.
- The document does not describe deleting a pairing.
OEM site DewertOkin: Remote control 2.4 GHz eco, ID 81157(e), 18 Jul 2023
Model record: RF Eco (Bedding) — Wireless handset →
RF ECO BASIC — Wireless handset + receiver set →
RF ECO BT receiver (Bluetooth + app)
Receiver box plugged into an OKIMAT 4 drive with floor lighting, a blue Bluetooth LED, a pairing button and a reset button. Controlled by an RF ECO or RF-TOPLINE handset and/or the “OKIN” app.
- Automatic: plug in the power supply, wait at least 2 seconds. Pairing opens for 120 s — first 60 s for the radio remote (floor light and blue LED on), then 60 s for Bluetooth (blue LED flashing).
- Manual: with power on, press the pairing button on the RF ECO BT twice quickly.
- During the radio phase press keys 1 + 2 together on the RF ECO or RF-TOPLINE handset. The floor light blinks twice when pairing succeeds.
- Bluetooth: install the “OKIN” app first, then connect during the blue-flashing phase.
- To repeat the automatic teach-in: unplug the power supply, wait 60 s and reconnect.
- Two beds in parallel: commission one system at a time — power and pair the first, then the second.
- Documented for RF ECO BT with OKIMAT 4. The memory variant (RF ECO BT M) may differ; check its own handbook.
OEM document, copy DewertOkin: RF ECO BT System Quick Guide, ID 85648, 30 Nov 2016 (copy hosted by a bed retailer)
Model record: RF ECO BT M — Receiver / control unit →
RF-TOPLINE handset with CU165
Larger backlit handset with a pairing button and DIP switches inside the battery compartment, used with a CU165 control unit (CU165 / BETADRIVE BZ / PD21 system).
- Connect the CU165 system to power and wait at least 2 seconds.
- Remove the batteries from the RF-TOPLINE handset.
- If your installer specifies it, set DIP switches 2–8 (switch 1 has no function here).
- Reinsert the batteries — the radio channel is set.
- Press the pairing button on the CU165 twice quickly. Its LED lights and pairing mode stays open for about 60 seconds.
- Press the pairing button inside the RF-TOPLINE battery compartment. When the CU165 LED goes out, pairing is complete.
- With an RF ECO BT receiver the RF-TOPLINE pairs with keys 1 + 2 instead (see RF ECO BT above).
- Do not change DIP switches on a working remote — it can move it to another radio channel.
OEM document, copy DewertOkin: System Quick Guide CU165 / RF-TOPLINE, ID 89316, v1.0, 11 Jan 2018 (FCC filing copy)
Model record: RF Topline — Wireless handset →
RF-TOUCHLINE handset
Flat 21-key bed handset with backlight, flashlight and vibration feedback; the receiver has a pairing button with LED.
- Connect all components and plug the power cord into the wall socket.
- Keep the handset less than 2 m from the receiver.
- Press the pairing button on the receiver twice until its LED lights up.
- Press keys 1 + 3 together and hold them until the receiver LED goes out and the handset LED stays on — pairing is complete.
- Second bed for parallel operation: repeat with keys 4 + 6.
- Key numbering follows the bed maker’s layout; the Quick Guide shows which physical keys are 1, 3, 4 and 6.
OEM document, copy DewertOkin: Quick Guide RF-TOUCHLINE, ID 90855, v1.0, Sep 2018 (FCC filing copy)
Model record: RF Touchline — Wireless handset →
Remote still not working?
Nothing moves, no light anywhere
Check the wall socket with another device and that the power supply cable is fully seated at the drive. If the receiver LED never lights when you press its pairing button, the receiver or supply is the suspect, not the remote. (KUVEV general check)
Stopped working after new batteries
Fit fresh batteries of the type shown on the battery cover, check polarity, then re-pair using the procedure for your remote below. On RF-TOPLINE, check that the DIP switches were not moved while changing batteries. (KUVEV general check + documented procedures)
Pairing LED goes out but the bed does not react
You may have paired the second channel (keys 3 + 4 or 4 + 6). Re-pair with the first-system keys (1 + 2, or 1 + 3 on RF-TOUCHLINE).
Works only when very close
Pair again at under 2 m as documented. If range stays short after fresh batteries, a weak handset or a metal frame/obstruction is likely — the original bed maker can test the handset.
One remote moves both beds
Both receivers were paired with the same keys. For separate control, pair each bed on its own with power applied to only one system at a time.
The app does not find the bed
On RF ECO BT, Bluetooth pairing only runs in the second 60 s after power-up (blue LED flashing). Install the “OKIN” app first, unplug for 60 s, plug in and connect during that window.
Not listed?
Many bed brands use their own handsets with OKIN electronics. The model number is usually inside the battery compartment or on the receiver. Decode the label →